ordering number : ena0195a LA6358NJM specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use. 90810 sy / 10606 ms ot 20051209-s00012 no.a0195-1/6 monolithic linear ic high-performance dual operational amplifier overview the LA6358NJM is a high-performance dual operational amplifier that can operate from a single voltage power supply. it features a built-in phase correction circuit. it can also operate from a dual power supply with both positive and negative levels and features low power consumption. the LA6358NJM can be used in a wide range of industrial applications as a transducer amplifier for all types of transducers, as a dc amplifier circu it, and for other purposes as well. functions ? high-performance dual operational amplifier specifications maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 32 v differential input voltage v id 32 v maximum input voltage v in max -0.3 to +32 v allowable power dissipation pd max ta 25 c 300 mw operating temperature topr -40 to +85 c storage temperature tstg -55 to +150 c recommended operating conditions at ta = -40 to +85 c ratings parameter symbol conditions min typ max unit supply voltage v cc 3 2 4 v
LA6358NJM electrical characteristics at ta = 25 c, v cc = 5v ratings parameter symbol conditions test circuit min typ max unit input offset voltage v io 1 2 7 mv input offset current i io i in (+)/i in (-) 2 5 50 na input bias current i b i in (+)/i in (-) 3,4 45 250 na common-mode input voltage range v icm 5 0 v cc -1.5 v common-mode rejection ratio c mr v cc = 30v 5 65 80 db large-amplitude voltage gain v g v cc = 15v, r l 2k 6 25 100 v/mv output voltage range v out 0 v cc -1.5 v supply voltage rejection ratio s vr 11 65 100 db channel separation cs f = 1k to 20khz 7 120 db current drain i cc 8 0.5 1.2 ma output current (source) i o source v in + = 1v, v in - = 0v 9 20 40 ma output current (sink) i o sink v in + = 0v, v in - = 1v 10 10 20 ma package dimensions unit : mm 3032d 14 85 5.0 0.63 6.4 0.15 0.35 1.27 (0.65) 4.4 (1.5) 1.7max 0.1 sanyo : mfp8(225mil) pin assignment no.a0195-2/6
LA6358NJM equivalent circuit test circuits 1. input offset voltage v io 2. input offset current i io 3. input bias current i b ( ? ) 4. input bias current i b ( + ) no.a0195-3/6
LA6358NJM 5. common-mode rejection ratio cmr common-mode input voltage range vicn 6. voltage gain vg 7. channel separation ch sep 8. current drain i cc 9. output current i o source 10. output current i o sink no.a0195-4/6
LA6358NJM 11. supply voltage rejection ratio svr ( + ) 12. supply voltage rejection ratio svr (-) no.a0195-5/6
LA6358NJM application circuit examples noninverting dc amplifier inverting dc amplifier square wave generator sanyo semiconductor co.,ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. when designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. upon using the technical information or products descri bed herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equi pment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor c o.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities conc erned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. this catalog provides information as of september, 2010. specificati ons and information herein are subject to change without notice. ps no.a0195-6/6
|
